Bread Board Trainers

Product Details:

Order Code - 33515
Electricity Trainer
'Electricity Trainer’ is a versatile training kit for a laboratory. It is designed such that all the basic electrical circuits can be tested with the help of this trainer kit. The experiments given with training system develop mental starting from an introduction to the circuit, basic fundamentals and complete circuits like series and parallel circuits, electromagnetic induction, coil behaviors with AC and DC circuits diode and transistor characteristics etc. This simple training kit provides a strong foundation for future studies in electrical or electronics.Object:Experiments that can be performed
01 To study the Resistances individually, as well as in series and in parallel connections.
02 To study the ohm’s law mathematical relation ship between three variables voltage (V), current (I) and resistance (R).
03 To study the voltage and current flowing into the circuit.
04 To study the behavior of current when light bulbs are connected in series/parallel circuit.
05 To study the Kirchoff’s Law for electrical circuits
06 To study the R-C circuit and find out the behavior of capacitor in a R-C network and study the phase shift due to capacitor. .
07 To study the L-C circuit and its oscillations.
08 To study the characteristics of a semiconductor diode.
09 To study the characteristics of a transistor.
10 To understand the Faraday’s Law of electromagnetic induction.Specification & Features:
DC power Supply : 5V. 200 mA
DC power Supply : 12V. 200 mA
AC power Supply : 6V, lA
Relay : 12V
Galvanometer : 30 -0 -30 .
Galvanometer Resistance : 80 Ohm
Light Bulbs (3 Nos.) : 6V

Additional Information:

• Item Code: 33515
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33501

Digital Lab

The DIGITAL LAB is intended for elementary as well as advance training of digital electronics. The digital lab covers regular digital circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules through use of 2mm brass terminals and patch cords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

Additional Information:

• Item Code: 33501
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 33502
Analog Lab 
Features
ANALOG LAB is intended for elementary as well as advance training of analog electronics. The trainer covers regular analog circuits by solderless interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords. Various DC regulated power supplies, Function Generator, DMM, Continuity Tester etc are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

Additional Information:

• Item Code: 33502
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33503
Digital- Analog Lab The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords.Experimental Coverage:
Analog
001. Study of Diodes in DC circuits
002. Study of Light Emitting Diodes in DC Circuits
003. Study of Half wave rectifier
004. Study of Full wave rectifier
005. Study of Zener Diode as a voltage regulator
006. Study of transistor series voltage regulator
007. Study of transistor shunt voltage regulator
008. Study of Low pass filter
009. Study of High pass filter
010. Study of band pass filterDigital
001. Logic gates operation
002. To verify De-morgan’s theorem With boolean logic equations
003. Binary to Gray code conversion
004. Gray code to Binary conversion
005. Binary to Excess-3 code conversion
006. Binary Addition and Subtractor007. Binary Multiplier
008. EX-OR gate implementation
009. Application of EX-OR gate
010. Johnson Counter

Additional Information:

• Item Code: 33503
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33504
Digital Trainer
Digital Trainer is intended for elementary as well as advance training of Digital electronics and for bread board digital circuits, AND, OR, NOT, NAND, NOR, XOR, Three State Buffer, RS Latch, JK Flip Flop, Monostable Multibrator. and UP/ DOWN Counter.Practical experience on this board carries great educative value for R & D labs, Science and Engineering Students.
Specifications:
01. Breadboard : Solderless Bread board with 1680 inter connected Tie Points
02. Pulse Switches : 2 No’s. Bounce free push buttons
03. Logic Switches : 8 logic level Switches in Dip type .
04. Power Supply : Fixed: +5V at 750 mA
05. Power Sockets : Logic Probe Power Supply Sockets
06. Logic Input : 8 LED buffered logic level indicators

Additional Information:

• Item Code: 33504
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33505
Logic Lab
Logic Trainer is designed for the logic beginners to enhance the comprehension of basic logical theory. The digital lab covers regular digital circuits by solder-less interconnections on breadboard and as well as compitable with all optional modules through use of 2mm brass terminals and patch cords The design of the equipment is easy to operate and understand. It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless bread board. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual.
Experimental Coverage:
01. Logic gates operation
02. To prove De-morgan’s theorem with boolean logic equations
03. Binary to Gray code conversion
04. Gray code to Binary conversion
05. Binary to Excess-3 code conversion
06. Binary Adder and Subtractor
07. Binary Multiplier

Additional Information:

• Item Code: 33505
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33506
Digital Lab Station is designed for the logic beginners to enhance the comprehension of basic logical theory. The digital lab covers regular digital circuits by solder-less interconnections on breadboard and as well as compitable with all optional modules through use of 2mm brass terminals and patch cords The design of the equipment is easy to operate and understand. It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless breadboard. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual.Experimental Coverage:
001. Logic gates operation
002. To prove De-morgan’s theorem With boolean logic equations
003. Binary to Gray code conversion
004. Gray code to Binary conversion
005. Binary to Excess-3 code conversion
006. Binary Adder and Subtractor
007. Binary Multiplier
008. EX-OR gate implementation
009. Application of EX-OR gate
010. Johnson Counter.

Additional Information:

• Item Code: 33506
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33509
Digital Electronic Trainer The Digital Electronic Trainer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 2 mm brass terminations and patch cords. Various clock generators, logic level input / output indicators and DC regulated power supply are in built. The unit housed in sunmica finished wooden box enclosure with provision for safe keeping of mains cord, patch cords and top lid for protection during storage.The Trainer CoverThe Following Experiment :
01. Study of basic gates and verification of their truth tables:
1.1 NOT 1.2 OR 1.3 AND 1.4 NOR
1.5 NAND 1.6 EX-OR 1.7 EX -NOR
02. Study and verifications of the law of Boolean algebra and De-Morgan’s Theorems.
03. Study of important TTL terminologies. Verification of important TTL Circuit parameters.
04. Construction and verification of various types of flip - flops using gates and Ic’s :
4.1 RS Flip-flop 4.2 J-K Flip-flop
4.3 D Flip-flop 4.4 T Flip-flopFeature:
Breadboards : Unique solder - less large size, spring loaded breadboard consisting of one Terminal Strips with 640 tie
points each and 2 Distribution Strips with 100 tie points each, totaling to 840 tie points. (size:55mm X 170mm
approx ).
DC Power Supply : 5 V ± 0.25V / 500 mA ( IC based regulated output ).

Additional Information:

• Item Code: 33509
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33510
Digital Logic Trainer (TTL) / Logic Trainer Board (Based on 74 Series) Digital Logic Trainer (TTL) / Logic Trainer Board based on 74 series has been designed specifically to make the students familiar with the study of TTL ICs and verification of the truth table of logic gates, flip-flops, Gated & Master Slave JK flip-flops, Schmitt Trigger, Expanders , Binary address, Counters, Shift registers, Multiplexer (Encoder), Demultiplexer (Decoder), 8 Bit D/A Converter and 8 Bit A/D Converter etc. Large area of Bread Board is provided on the front panel for ICs. Students can make the circuit easily on the Bread Board with the help of other accessories which are provided on the front panel of Digital Logic Trainer.Specifications:
01. OUTPUT D.C. VOLTAGE : Fixed 5V and 0 - ±18V.
02. OUTPUT CURRENT: 1 Amp.
03. LOAD REGULATION : ± 1% of the highest specified output voltage. (NO LOAD TO FULL LOAD)
04. RIPPLE AND NOISE : less than 2 mV.
05. VARIABLE CLOCK FREQUENCY : 1 Hz to 1 MHz by three frequency range & multiplier.

Additional Information:

• Item Code: 33510
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33512
Digital IC Trainer (TTL) (for Verification of Truth Table of Logic Gates) Digital IC Trainer (TTL) has been designed for verification of the truth table of logic gates and address etc. Students can be trained about the digital ICs by using this board. The fundamentals of the digital ICs can easily be understood by performing required experiments for verification of truth table of logic gates. SPECIFICATIONS:
* OUTPUTD.C. VOLTAGE : Fixed 5V ±1%.
* OUTPUTCURRENT : 1.5 Amp.
* LOAD REGULATION : ±1% of the highest specified output voltage. (NO LOAD TO FULL LOAD)
* RIPPLE AND NOISE : less than 5 mV.

Additional Information:

• Item Code: 33512
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Model Number - 33514
Logic Gates Circuit Trainer

Features :
Logic Gates Circuit Trainer offers a unique entry into the world of microelectronics. The system combines simple, easy to use, ICs for various gates and flip-flops, power supply, clock input and output state with a versatile solderless bread board area. Students new to digital electronics can implement logic circuits in a matter of minutes on the bread board area. As confidence grows the student will naturally progress for using more complex logic ICs on the large bread board area. This unique approach enables the unit to be used by the absolute beginner, yet it may also be usefully employed in advanced project work. The many outstanding features of the logic trainer, combined with its ease of use and robust housing, make it the first choice for those wishing to introduce students to digital electronics for the first time.

Practical experience on this board carries great educative value for Science and Engineering Students.

Additional Information:

• Item Code: 33514
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 33516

"Electricity Lab" is a versatile training kit for a laboratory. It is designed such that all the basic electrical circuits can be tested with the help of this trainer kit. The experiments given with training system develop mental starting from an introduction to the circuit, basic fundamentals and experiments on Ohm's Law, Magnetism, Relay, Power, Lenz's Law, Motors, Diode, Kirchoff's Law, R, L, C and many more. This simple training lab provides a strong foundation for future studies in electrical or electronics. This takes students from the basic of ohm's law, through simple series and parallel circuit analysis and into same elementary aspects of electronics where they will build circuits using capacitors and diodes. With this system a set of coils and cores are provided. These high quality coils (Labeled with number of turns) and laminated iron cores provides an effective introduction to electromagnetic theory.

Additional Information:

• Item Code: 33516
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33517
Power Electronics Lab
Power Electronics Lab is used to perform power electronics circuit experiments. It is very useful in power electronics laboratories for performing power experiments in colleges and universities. It is very for student to know about the characteristics of power electronics devices and the applications of power devices. The applications or power devices are in alarm circuit, lamp flasher, rectifiers, choppers, invertors. It is also used for commutation circuits.Technical Specifications:DC Power Supply on Board : ± 5V at 100mA
: ± 12V at 150mA
: ± 15V at 50mA
: ± 35V at 50mA
AC Power Supply on Board : 18V - 0V - 18V at 50mA
: 15V - 0V - 15V at 50mA
Triggering Circuit on Board : 5 gate signal output

Additional Information:

• Item Code: 33517
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33511
Digital Logic Trainer (cmos) / Logic Trainer Board (based On 74 C/4000 Series) Digital Logic Trainer (CMOS) / Logic Trainer Board based on 74 C/4000 series has been designed to make the students familiar with the study of CMOS ICs and verification of the truth tables of logic gates, flip-flops, Gated & Master Slave JK flip-flops, Schmitt Trigger, Expanders , Binary address, Counters, Shift registers, Multiplexer (Encoder), Demultiplexer (Decoder), 8 Bit D/A Converter and 8 Bit A/D Converter etc.Specifications:
01. OUTPUT D.C. VOLTAGE : Fixed 5V, Variable 0 to ±18 V.
02. OUTPUT CURRENT: 1 Amp.
03. LOAD REGULATION : ±1% of the highest specified output
voltage. (NO LOAD TO FULL LOAD)
04. RIPPLE AND NOISE : less than 2 mV.
05. VARIABLE CLOCK FREQUENCY : 1 Hz to 1 MHz by three
frequency range & multiplier.
06. LOGIC INPUTS : 16 switches for High/Low
07. OUTPUT INDICATORS : 16, 5 mm bright Red LEDs.
08. SEVEN SEGMENT DISPLAY : 4 digit seven segment display
with decoder driver.
09. DIGITAL VOLTMETER : Digital DC voltameter range 0 - 20V.
10. OPERATING CONDITIONS : 0 to 40°C and 95% R.H. at 40°C.

Additional Information:

• Item Code: 33511
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33519
Electrical & Electronic System Trainer Master Unit
Specification of Master Unit: Built in Power Supply:DC Supply : 5V / 1A. & ± 12V, 500mA.0 to 15V DC (Variable), 100 mA (Isolated) 0 to 30V DC (Variable), 100 mA (Isolated)High Volt DC - 15V to 220 V, 100mA.AC Supply : 12-0-12V AC, 150 mA. Short circuit protected

Additional Information:

• Item Code: 33519
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33508
Bread Board Circuit Lab

The Bread Board Circuit Lab is intended for elementary as well as advance training of analog electronics. The trainer cover regular analog circuits by solder less inter connections through use of 2 mm brass terminations & patch cords. Various AC & DC regulated power supply in built. The unit is housed in sunmica finished wooden enclosure with provision for safe keeping of mains cord, patch cords and top lid for protection during storage.
The Trainer Cover The Following Experiment :

• Study of basic gates and verification of their truth tables:
• Study and verifications of the law of Boolean algebra and De-Morgan's Theorems.
• Study of important TTL terminologies. Verification of important TTL Circuit parameters.
• Construction and verification of various types of flip - flops using gates and IC's :
• Construction and verification of various types of combinational circuits :
• Construction and verification of various types of counters :
• Construction and Verification of 4 Bit Universal Shift Register :
• Many other experiments are possible using the onboard components and Bread board .

Additional Information:

• Item Code: 33508
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33513
Bread Board Trainer
Features :
Bread Board Trainer Board has been designed to make the students familiar about the utility of Bread Board. This Bread Board Trainer is a basic lab. equipment for assembling various prototype circuits without soldering. For experiment purpose other necessary accessories are provided on the panel. Practical experience on this board carries great educative value for Science and Engineering Students.

Additional Information:

• Item Code: 33513
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 33507
Power Project Board System has been designed to provide instant circuit construction without soldering on the bread board area .Learners can insert components directly on breadboard and make all interconnections as required with 24 Swg (Gauge) solid wire. Within few minutes they can complete their projects/design on the same.
Your precious IC's are not damaged & are instantly reusable, No expensive special jumpers are required. You can insert all components directly without any adapters i.e. IC's such as types 8, 14, 16, 20 or 40 pin DIP units, LSI's and all discrete components with lead diameter upto 0.56mm (24 Swg).

Features:

• Breadboard : Unique solder-less large size, spring loaded breadboard consisting of 3 Terminal Strips with 1920 tie points and 5 Distribution Strips with 500 tie points , totaling to 2420 tie points.
• Power Supply

Additional Information:

• Item Code: 33507
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box