Consumer Electronics Trainers

Product Details:

MOBILE PHONE TRAINER kit has capability of full duplex mobile communication. Provides basic theory and working fundamentals of a 2G hand set based on the NOKIA 3310/3315. This trainer kit designed with a view to provide network, power supply, charging & user interface circuits for their practical and theoretical study based on NOKIA 3310/3315.

Practical experience on this board carries great educative value for Science and Engineering Students.

Features:

1. Real time Mobile Operation
2. Expanded and open trainer
3. Full understanding of mobile phone working
4. Frequency measurement and band verification
5. Provides study of all sections in mobile phone
6. TX/RX Frequency measurements
7. 2G technology & GMSK signals
8. GSM data rate
9. Detail study of User Interface Control signals
10. Detail study of SIM Operation
11. Battery identification and charging study
12. Switch Faults

Code : 10903

 

Additional Information:

• Item Code: 10903
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10924
SMD Technology Kit Contains:
1. SMD Identification Board The user is familiarized with different SMD Components -Resistors, Capacitors, Inductors, Diodes,
Transistors & IC's packages.
2. Proto BOARDS
Proto BOARDS are special PCB's with readymade solder pads for various SMD components & IC's, which makes the soldering much
easy. It includes Through Hole, SO, SOP, Chip Scale package Proto BOARDS.
3. SMD Soldering Jig
4. SMD Soldering Iron
AVariable Temperature Controlled Soldering Iron is supplied with lead.
5. SMD components
SMD components are supplied for Solder practice. Resistors , Capacitors, Diodes , Transistors
List of Accessories :
1. SMD Identification Board with manual 1 no.
2. Proto BOARDS 2 nos each
- Discrete Surface Mount
-SOP
-SO
-Through Holes
-Chip Scale
3. SMD Soldering Jig 1 no.
4. SMD Soldering Iron 1 no.
5. SMD components
Resistors , Capacitors, Diodes , Transistors 10 no. each
6. Tweezers 2 no.
7. Manual 1 no.

Additional Information:

• Item Code: 10924
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10901
Telephone Trainer is complete working model of telephone. It gives hands on experience on basic telephony concepts, working and different experiments on telephone. The trainer comes complete with exhaustive experiment manual, accessories, test points, and LED''s for indication. The complete circuit is printed on single sided PCB in section wise format, depicting the complete flow of system.
Experiments:
01. Understanding of telephone.02. Study of telephone features.
03. Study of speech circuit.
04. Study of ringer.
05. Study of tone dialing.
Features:
01. Single sided PCB depicting different working sections.02. 35 test points and LED''s provided on board to study signals.
03. Power from external telephone line, no power supply is required.
04. Pulse dialing as well as tone dialing facility.
05. Dialer and ringer section.
Technical Specifications :

01. Line in section : One dot line connection port.02. Handset : One handset connection port.
03. Keyboard : 4x3 matrix keyboard.
04. Dialer : Tone and pulse.
05. Facilities : Redial up to 32 digits, Mute, Redial, Flash, Pause switches.

Additional Information:

• Item Code: 10901
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10902
This Trainer has been designed with a view to provide practical and experimental Knowledge of general circuit of PA (Public Address) System
Trainer on Single P.C.B. of size 300 x 400mm".

Features:
The P.A. System Trainer consists of :
01. The complete circuit of a public address amplifier is printed on a single PCB.02. All part are soldered on PCB.
03. Explanation, Observation, Alignment and adjustment of internal and external control possible due to single PCB.
04. Easy identification of different parts is possible at a glance.
05. Easy measurement of voltages and observation of waveforms at any point. Also typical voltages and waveforms are provided.
Technical Specifications :
01. Signal to noise ratio : 60 dB.02. Frequency response : 100 Hz to 15000 Hz.
03. Amplifier with two mic. inputs.
04. One mic. & One Aux. inputs.
05. Power supply : 220VAC 50 Hz.

Additional Information:

• Item Code: 10902
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10905
AM/FM Radio Trainer Kit has components placed over their corresponding symbols in the schematic drawing on the surface of the printed circuit board thereby maximizing the learning process and explain theory of operation of the radios. The radios are constructed in sections with each section being completely tested before moving on to the next, reducing difficult troubleshooting associated with some other kits. Trainer includes a high quality printed circuit board with schematic printed on the surface.

Specifications:
(1) Am Radio Section:
Tuning Range : 520 KHz - 1620 KHz
IF Frequency : 455 KHZ
Tracking : + - 3 db from 700 KHz to 1400 KHz
10 db Signal to Noise at 200 microvolt typical
(2) Fm Radio Section:Tuning Range : 88 MHz - 108 MHz
IF Frequency : 10.7 MHZ
Tracking : + - 5 db from 90 MHz to 106 MHz
DETECTOR : Uses Ratio detector and full time auto frequency control
10 db Signal to Noise at 12 microvolt typical

Additional Information:

• Item Code: 10905
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10913
The SMPS trainer is a very adaptable product that has been designed to explain a very remarkable and frequently used Switching based power supply - The SMPS (Switched Mode Power Supply).
Technical Specifications:
Input : 80 to 230 VAC +-10%, 50 / 60 HzOutputs : +12 V DC regulated : -12 V DC regulated
: +5 V DC regulated
Switching Transformer:Input : 320 V DC switching at 132 KHz
Output : 30 VAC (approx)
Experiments that can be performed:

• Study of Switching Transformer
• Study of PWM switching device
• Study of Optocoupler
• Study of Regulation

Additional Information:

• Item Code: 10913
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10912

The Power Supply Trainer is a comprehensive training system forthe laboratories. It is useful in understanding the various concepts of a DC Power Supply. As we know that power supply is a very basic element of any electronic circuit or appliance. Starting from a mobile charger to a huge Computer system, each needs an efficient Power Supply. It is essential for an engineer to know basic concepts of Electronic Power Supplies.
Technical Specifications
Input : 230 V +-10%, 50 HzZener diode outputs : 10 V, 5.6 V regulatedRegulators outputs : +12 V regulated
-12 V regulated
1.8 to 17 V adjustable

Additional Information:

• Item Code: 10912
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10922
Refrigeration Trainer allows students & industry professionals to learn the fundamentals of Simple Vapour Compression Refrigeration System. The design of this Refrigeration Training System is to allow the user to study this Technology in great detail. The training system introduces various sub-systems with real components. The training system brings a comprehensive view of the entire Refrigeration system. Actual component study and their interconnection, functions, operation, diagnosis, etc. are a part of the scope of training.
Technical Specifications

• Condenser : 10 11 2 Turns
• Motor : 230 VAC - 50 Hz, 0.40 Amps, 9 watt
• Evaporator & Tank : Capacity : 20 litres

Additional Information:

• Item Code: 10922
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Complete working model of CD/VCD Player Trainer. It gives hands on experience on basic concepts, working of CD/VCD Player. The trainer comes complete with exhaustive manual, accessories, test points, and LED's for indication. The complete circuit is printed on single sided PCB in section wise format, depicting the complete flow of system.

Features

1. The complete circuit of a CD/VCD player is printed on a single P.C.B.
2. The digital signal processing section is in assembled open out P.C.B.
3. Explanation, Observation, Alignment and adjustment of Internal and external possible due to single P.C.B.
4. Easy identification of different parts and Mechanism at a glance.
5. Easy measurement of voltage and observation of waveforms at any point.
6. A manual having practical detail is provided with the trainer.
7. The whole circuit of the CD/VCD Player is explained sectionwise in detail in the manual.

Code 10904

Additional Information:

• Item Code: 10904
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

MULTIMEDIA COMPUTER TRAINER This trainer provides training of hardware and software theory of a based on Intel Celeron CPU with
experiments on 98 & XP.

Features

• The Different circuit boards of PC/AT Computer are exposed on a PCB.
• Troubleshooting and fault finding procedure explained in details.
• Artificial fault creation facilities are provided by the switches.
• About more than 60 faults can be demonstrated at a glance.
• Easy measurement of voltage and observation of waveforms. The typical voltages and waveforms are provided.
• An Exhaustive and Skilled oriented comprehensive instructional manual with complete theory explanation.

Code 10906

Additional Information:

• Item Code: 10906
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Colour TV Trainer is an ideal training equipment to teach the operation of colour TV receivers. The complete circuit of colourTVReceiver is printed on single PCB. Sectionwise coloured printing on PCB helps in easy understanding of function of different blocks. More than 50 test points allow the analysis and monitoring of the signals in different sections. It safe to operate because all the test points are protected against accidental shortcircuits. By using the fault simulation method, it is possible to introduce the most common breakdown and their rectification. Technical manual includes circuit diagram with component list of each section. Test point details with typical voltages and wave forms are provided in the manul. The Trainer has been specially designed with Sliding Main Board with locking facility. The detachable CRT Unit is another feature. It can also be used as a normal desktop Colour TV Receiver.

1. TV Receiver in open form with all components&controls placed on single PCB
2. Each circuit block shown in different colour for easy identification
3. Solderless fault creation&Rectification
4. Legend printing on PCB
5. More than 50 test points
6. Compact Design-Sliding Main board with locking facility
7. Can be used as Desktop Colour TV
8. Fully documented Operating Manual with glossary of terms
9. Manual and remote control operation
10. Detachable CRT Unit.

Code: 10908

Additional Information:

• Item Code: 10908
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The UPS trainer is a very versatile training system, has been designed to explain a very interesting and frequently used switching based power supply - The UPS (Uninterrupted Power Supply).

The product is designed keeping in mind that a student can understand each block of UPS in a very easy way. Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. AVR (Automatic Voltage Regulator) is presented in such a way that a student can readily understand its functioning and pin configuration.

Since UPS is different from an inverter because its switching changeover time is less than 3 mS which is very less so a computer system doesn't get reboot.

Code 10914

Additional Information:

• Item Code: 10914
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

RFID TRAINER is an excellent learning/ training system for understanding basics, working and application of RFID (Radio Frequency Identification). It comprises of Contactless RFID Reader, 5 Mifare contactless cards, RFID Applications/Demo/Video Software. System works on 13.56 MHz and ISO 14443A read and write support. RFID is an automatic identification technique, storing and retrieving data using RFID tags or transponders. RFID tags (Active or Passive) is stuck into a product, animal or person for identifying using radiowaves. Most RFID tags have 2 parts: Integrated circuit for storing, processing information, modulating/ demodulating a RF signal and Antenna for receiving/ transmission. Applications for RFID includes transport payments, product tracking, animal identification, inventory systems, human implants, libraries etc.

Features:

• Software for understanding/working on Applications, Demo, Product Videos
• Contactless RFID Reader at 13.56 MHz with 6cm range
• Can be used for Active RFID tags (Optional)
• Read/Write ISO 14443A protocol Mifare 1K memory RFID cards
• 16 x 2 LCD Display with 89C51 Micro controller
• On board Breadboard with 840 tie points for designing other applications
• High Speed Transactions and flexible configurations
• USB to Serial interface for RFID Reader

Code - 10934

Additional Information:

• Item Code: 10934
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

RFID Trainer is a versatile training system for laboratories. It consists of many experiments to understand the basics of the Technology.

RFID is the abbreviated form of Radio Frequency Identification. RFID means storing and retrieving data through Electromagnetic Transmission to a RF compatible circuit. RFID Technology can be viewed as a new generation of Technology that replaces barcodes. However it is a core Technology with much wider range of applications in logistics, traffic, security, monitoring application etc.

It is a passive RFID system, working on 13.56 MHz Frequency range and supports multi protocols. Our system has a RFID reader module with an antenna and some RFID tag cards which support different protocols and each has different U.I.D (Unique Identification) number. The trainer kit consists of a reader chip for reading the tag and a microcontroller for processing the data. The transreceiver chip is a reader chip which supports ISO/IEC 14443A, 14443B, 15693 standards. Tags contain different Ics for different protocols.

Code - 10917

Additional Information:

• Item Code: 10917
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Frequency Counter Trainer, is an exclusive and attractively designed product to demonstrate the fundamental principle and functioning of Frequency Counter. It includes various circuits namely, attenuator circuit, wave shaping circuit, frequency divider circuit, display driver circuit, and gate time circuit. All these circuits are incorporated on a single board for study and verification.

Simple representation of all the circuits can explain corresponding functionality in a very easy way to perceive the logics.

Code - 10916

Additional Information:

• Item Code: 10916
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The ATM Demonstrator is a very special Training System that has been designed to understand the working of an Automated Teller machine.

The product is designed in such a way that a student can understand each block of ATM in a very easy way. Various test points are given to check inputs and outputs of each block. Being different from a conventional block diagram, internal structures of different blocks are also shown.

• Exclusive appearance and easy illustration of ATM Technology
• A Low cost training system demonstrating all basic concepts of ATM
• Various test points are provided for study purpose
• Provided with an extensive manual
• 2 years Warranty
• Experiments that can be performed

Code - 10918

Additional Information:

• Item Code: 10918
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The Bluetooth Technology Trainer, is designed considering the International Communication Standards. It is helpful for students and researchers in the field of RF and IT engineering to understand the basic concepts of Bluetooth Technology. Based on Class 2 Bluetooth System having range up to 10 meters and is fully compliant for Data Communication. It consists of two identical modules and any one of these can be selected as a Master or Slave for Communication. This Training System can be connected to PC for operation and execution of Bluetooth AT Commands. Bluetooth standard AT commands can be run on the graphical LCD display also with the help of keyboard.

• Graphical LCD display
• Bluetooth enabled devices detection
• Designed considering all the Communication Standards
• Data Generator is provided on-board
• User friendly software
• Equipped with UART & USB port
• Computer independent Training System
• Test points are provided to observe signal

Code - 10919

Additional Information:

• Item Code: 10919
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

SALIENT FEATURES
It offers comprehensive experiment set up explaining various physical topology of LAN viz; Token Ring, Token Bus, Ethernet
(CSMA/CD), Modbus etc. & variety of TCP, IP, HTTP, SMTP, wireless LAN (802.11) etc. Protocol demonstrator through error generation facility sans socket programming.
Set of Users Guide provided with each unit.
Table top setup made using light but sturdy aluminum profile (4X2) Rack complete with cables connectors, Optionally external USB to RS232 Converter is Provided
Order Code: 10942

Additional Information:

• Item Code: 10942
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Salient Features

• Trainer offers comprehensive experiment set up explaining Bluetooth & Zigbee Protocols.
• Either my buy shared set up with replaceable NICs or independent setup of nodes for each technology. However NICs could be replaced in one setup to experiment with other.
• Table top setup made using light but sturdy Aluminum profile (4X2) Rack.
• Lab PC with serial USB port required for network monitoring or ot work as user, PC not in scope of supply.
• Set of Users Guides provided with each unit.

Code - 10940

Additional Information:

• Item Code: 10940
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Salient Features

• Trainer offers comprehensive experiment set up explaining Bluetooth & Zigbee Protocols.
• Either my buy shared set up with replaceable NICs or independent setup of nodes for each technology. However NICs could be replaced in one setup to experiment with other.
• Table top setup made using light but sturdy Aluminum profile (4X2) Rack.
• Lab PC with serial USB port required for network monitoring or ot work as user, PC not in scope of supply.
• Set of Users Guides provided with each unit.

Code - 10941

Additional Information:

• Item Code: 10941
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Technical Specification

aluminum profile sturdy flat panel (table top) system, carrying carious high voltage components housed in plastic enclosures (panel) to minimise shock possibility.

Code - 10947

More Details In Attached PDF...

Additional Information:

• Item Code: 10947
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The Inverter trainer is a versatile training System for Laboratories. It is designed such that all the basics of Inverter can be easily understood. This training system provides understanding about conversion of DC into AC by PWM Technique. Different blocks are explained like charging of battery, DC to AC conversion, AC mains sensing circuit, etc. also provided with fault switches to develop the troubleshooting practice.

Code - 10920

More Details In Attached PDF...

Additional Information:

• Item Code: 10920
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Stereo Tape Recorder Trainer is ideal equipment to teach the operation of stereo recording and stereo cassette playing function. The comprehensive study of Tape record and Mechanism unit technique is described in the operating manual. One of the main features of this trainer is fault simulation. The fault created in the trainer in no way damages the trainer.

Code - 10927

More Details In Attached PDF...

Additional Information:

• Item Code: 10927
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

10945 Trainer is a very versatile training system, has been designed to explain a switching based Switch Power Supply. The product is designed keeping in mind that a student can understand each block of SMPS in a very easy way. Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. Switching Transformer is presented in such a way that a student can readily understand its functioning and pin configuration. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdown and their rectification.

Code - 10945

More Details In Attached PDF...

Additional Information:

• Item Code: 10945
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Bernoulli's Theorem Demonstrator facilitates the students and the industrial professionals to explore the fundamentals of "Bernoulli's Theorem" in Fluid Mechanics. It states that, in a steady flow the sum of all forms of mechanical energy (kinetic, potential and pressure energy) in a fluid along a streamline is the same at all points on that streamline.

It consists of classical venture of clear acrylic. A series of wall tapping allows measurement of static pressure distribution of convergent duct, while a total head tube is provide at the centre of throat. These tapping are connected to a bank of manometer tube.

This unit has been designed with Hydraulic Bench to study the characteristic flow through convergent and divergent section. During the experiment, the water fed to the venture and the flow rate can be control by the gate valve at the outlet of venture. The venture is used to demonstrate the flow rate measurement and to determine the co-efficient of discharge.

Code - 10923

More Details In Attached PDF...

Additional Information:

• Item Code: 10923
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

10944 is a LCD/LED Colour TV Trainer is an ideal training equipment to teach the operation of LCD/LED colour TV receivers. The complete Block of LCD/LED TV Receiver is printed on single PCB for easy understanding of function of different blocks. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdown and their rectification.

Code - 10944

More Details In Attached PDF...

Additional Information:

• Item Code: 10944
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code : 10939 GSM Mobile Trainer Kit is an easy medium of learning the fundamental concept of Mobile communication like GSM, GPRS. The main focus of MCLS is in opening up a whole new world for you, mobile communication concepts like Call setup, call forward, SMS, voice, data and other Network protocols are also experimented on vis-a-vis the existing environment.

Features:

• Remote control by AT commands (GSM 07.07 and 7.05)
• Baud rate from 300 to 115,200 bits/s, Auto baud.
• Various LED indicators for POWER, Network, Low battery,
• Battery charging & Battery status & serial
• Communications, Battery temp. indication etc.
• Provision for auxiliary audio MIC & speaker connect.
• Appropriate test points at various stages.
• Specific digital inputs to allow direct SMS transmission if
• any input changes state.
• Relay output controlled over SMS.

Code - 10939

More Details In Attached PDF...

Additional Information:

• Item Code: 10939
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The "Function Generator Trainer " is a versatile training kit for Electrical and Electronics Laboratories. It is designed to explain the fundamentals of Signal Generation. A Function Generator is a product that can produce various patterns of Voltage at a variety of Frequencies and Amplitudes. This Function Generator Trainer allows students to produce the different waveforms and to understand the concept of their generation.

Features

• A low cost trainer demonstrating all basic concepts of
• Function Generator
• Exclusive presentation and easy illustration of each block
• Designed considering all safety standards
• Low sine wave distortion
• Low variation with temperature
• Fault creation and troubleshooting
• Onboard Frequency range display
• Provided with elaborated operating manual

Code - 10915

Additional Information:

• Item Code: 10915
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

The Trainer has been specially designed for learning how to use a Spectrum Analyzer for Frequency and Level Measurements and Tracking Generator applications like HF Filters and Amplifier Response, Channel Modulation, Mixers, study of Mobile and Cordless signals and study of Harmonics in sine, square & triangular waves. TV & FM transmitted signals can be analyzed on Spectrum Analyzer using this Trainer and audio output can be heard on the speaker mounted inside the trainer.

Code - 10925

Additional Information:

• Item Code: 10925
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

EPABX Trainer is a Microprocessor based system designed to help the students to understand the basic concept and working of a Telephone Exchange. All the components are mounted on a single PCB in functional blocks and have various Test points to monitor all kinds of telephonic signals.

Code - 10946

More Details In Attached PDF...

Additional Information:

• Item Code: 10946
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

An ideal trainer for studying the applications of a Digital Storage Oscilloscope. The applications demonstrated forms part of the electronics lab. All experiments are housed in a single attractive box which is self contained, ready to use having built- in DC power supplies.

• Single shot Switching transient of a push to on switch is demonstrated
• Slow Motion Charging and discharging of an electrolytic capacitor
• Medical ECG Simulated wave with pulse rate adjustment
• Low repetition rate Sine wave generator of low frequency
• Mechanical Relay bouncing and turn ON time
• Audio MIC Testing with variable gain audio amplifier

Code - 10926

More Details In Attached PDF...

Additional Information:

• Item Code: 10926
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

1. Overview

This set can truly simulate elevator working condition. It can complete lift go up and down, open and close door. The set is composed by working portion, control portion and PC interface. The working porting including various industrial gearing and sensor. It well simulate elevator open closed structure. The control portion have three control method (PLC,MCU and PC)to complete control operation.

The set auto un controlled by MCU. Starting control button which on interface panel to control elevator. Additionally, the set can connect with PLC to control elevator. Rotating change-over which SA1 to change control method (MCU, PLC or PC).

This set install PC monitor which can direct monitoring elevator running on PC. This set is composed by aluminium training platform, car platform sill, signal transfer part and building show parts

2. Parameter

1. Working pressure DC24V
2. Temperature -100C ~ 400C; Humidity 90% (250C).
3. Total capacity 1KVA

Code - 10936

More Details In Attached PDF...

Additional Information:

• Item Code: 10936
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Oscilloscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layout schematic. Thus a trainee can easily locate any section, & components in the section and study it thoroughly. The function controls and the adjustment controls are fully accessible to the trainee to verify their effect on the working of the scope. Creation of Faults and rectification of faults are important exercise covered in the experiments. An illustrated Block and Circuit Schematic and the adjustment plan right in front of the trainee's eyes helps him to correlate each operation during the demonstration.

• Oscilloscope in open form with all components and controls placed on single PCB
• Amplifier, Time base, Channel section signal available on test points
• Separate sections for PS, EHT, VA, HA, TB & Trigger for easy identification
• Fault creation & rectification provided
• Track printing with different colours on different sections on component board for easy circuit training
• Legend Printing on PCB for easy identification of components
• Can be used as a standard 20 MHz Dual Trace
• Oscilloscope

Code : 10909

 

More Details In Attached PDF...

Additional Information:

• Item Code: 10909
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 10954
Anti Lock Braking Training System
INTRODUCTION:

An anti-lock braking system (ABS) is an automobile safety system that allows the wheels on a motor vehicle to maintain attractive contact with the road surface according to driver inputs while braking, preventing the wheels from locking up (ceasing rotation) and avoiding uncontrolled skidding. It is an automated system that uses the principles of threshold braking and cadence braking which were practiced by skilful drivers with previous generation braking systems. It does this at a much faster rate and with better control than a driver could manage.COMPONENTS OF THE TRAINER:
1) Mains On/Off2) Digital Control Panel
3) USB Connector Interface
4) Brake Light
5) Electronic Control Unit (ECU)
6) Hydraulic Activator
7) Pressure Gauge
8) Brake Pedal with Master Cylinder

Briefly explain all the components of unit:
1. Main On/Off: To start the trainer2. Digital Control Panel: To accelerate the wheels by increasing the RPM and pressure consumes by the wheels during press the brake pedal.
3. USB Connector Interface: To connect the data logging software with computer.
4. Brake Light: Light reflects the braking effort being brake pedal applied.
5. Electronic Control Unit (ECU): The ECU constantly monitors the function of components within the system. If any electrically detectable fault occurs, the control unit will illuminate the dashboard warning light to alert the operator.

Additional Information:

• Item Code: 10954
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Wooden Box

Product Details:

Order Code - 10906A
Laptop Trainer
10906A Trainer is a very versatile training system, has been designed to explain a switching based Switch Power Supply. The product is designed keeping in mind that a student can understand each block of SMPS in a very easy way. Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. Switching Transformer is presented in such a way that a student can readily understand its functioning and pin configuration. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdown and their rectification.

Additional Information:

• Item Code: 10906A
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 10920A
Inverter TrainerThe Inverter trainer is a very versatile training system, has been designed to explain a very interesting and frequently used switching based power supply - The Inverter (Uninterrupted Power Supply). The product is designed keeping in mind that a student can understand each block of Inverter in a very easy way.
Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. AVR (Automatic Voltage Regulator) is presented in such a way that a student can readily understand its functioning and pin configuration. Since Inverter is different from an inverter because its switching changeover time is less than 3 mS which is very less
so a computer system doesn't get reboot.

Additional Information:

• Item Code: 10920A
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 10952
CCTV Trainer10952 Bench for CCTV Trainer is an ideal training equipment to teach the operation of Close circuit Video. The complete Block of CCTV is printed on single PCB for easy understanding of function of different blocks. Test points allow the analysis and monitoring of the signals in different sections. By using the fault simulation method, it is possible to introduce the most common breakdown and their rectification.

Additional Information:

• Item Code: 10952
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code - 10953
Microwave Oven TrainerGeneral Feature
-TypeSolo
-Capacity17 Ltrs
· Cooking Feature-DefrostYes
· Body Feature
-CavityStainless Steel Cavity
-Control TypeMechanical
· Power Consumptions
-Power Consumption1200 Watts
-Power Level5
· Physical Features
-Dimension (W X H X D)452 X 262 X 335
· Additional Features
-Child LockYes
-Alarmyes

Additional Information:

• Item Code: 10953
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Order Code: 10907
Colour TV Trainer is an ideal training equipment to teach the operation of colour TV receivers. The complete circuit of colour TV Receiver is printed on single PCB. Sectionwise coloured printing on PCB helps in easy understanding of function of different blocks. More than 50 test points allow the analysis and monitoring of the signals in different sections.
It can also be used as a normal desktop Colour TV Receiver.
01. TV Receiver in open form with all components&controls placed on single PCB
02. Each circuit block shown in different colour for easy identification
03. Solderless fault creation&Rectification
04. Legend printing on PCB
05. More than 50 test points
06. Compact Design-Sliding Main board with locking facility
07. Can be used as Desktop Colour TV
08. Fully documented Operating Manual with glossary of terms
09. Manual and remote control operation
10. Detachable CRT Unit.

Experiments that can be performed
01. Study of RF-Section through test points, fault simulation&rectification
02. Study of VIF- section through test point, fault simulation&rectification
03. Study of Video/Chroma section through test points, fault simulation&rectification
04. Study of System Control Section through test points, faults simulation&rectification
05. Study circuit of Horizontal&Vertical Oscillator&Output sections
06. Study of circuit of Horizontal&Vertical output sections through test points fault simulation&rectification
07. Study of R-GBvideo output Section
08. study of Audio Sound section and many more.

Additional Information:

• Item Code: 10907
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Printer / Scanner / FAX / Phone Trainer

Salient Features

• Various components of the printer are made accessible to the students by s preading out on a cuboid demo rack made from aluminum profile
• Non-destructive simulated faults have been implemented through slider s witches located on Fault Panel to teach section wise faults & their troubleshooting
• When not in use Printer trainer may be used as a USB port based regular Lab printer / scanner machine.
• Set of Instructor Guide and Student workbook provided with each unit.

Code - 10943

More Details In Attached PDF...

Additional Information:

• Item Code: 10943
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week
• Packaging Details: Corrugated Box

Product Details:

Stereo FM Radio Trainer is designed to cover the fundamental aspects of the subject. This is Student friendly and self contained, having all the basic required circuits and control on board. FM detection is described in the manual and covered in the experiments. Student trouble shooting work is included through switched faults in this trainer. This forms a complete training package of Stereo FM Radio trainer.

• A self contained trainer with built in power supply
• Functional block indicated on board mimic
• Various test points provided on board
• Switch fault are provided to study different effects on circuit
• Operation manual provided
• Complete FM Stereo Receiver with on board stereo
• Signal (LED) indicator
• Capable of receiving signal between 88 to 108 Mhz
• On board dual Speaker to identify signal for L and R channel separately

Code - 10929

Additional Information:

• Item Code: 10929
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week