Embedded & Microprocessor Trainers

Product Details:

Order Code - 43003 
8086 Microprocessor Trainer 

Features :
8086 Microprocessor Trainer uses Intel 8086 is a 16-bit microprocessor as CPU. This is one step above 8085 (8-bit) microprocessor. The term "16-bit" means that its arithmetic logic unit, internal registers, and most of its instructions are designed to work with 16-bit binary words. The 8086 has a 16-bit data bus, so it can read data from or write data to memory and ports either 16 bits or 8 bits at a time. As its address bus is 20-bit wide, it can address memory up to 1,048,576 locations. Each of the 1MB locations represents bitewide. Therefore it is necessary to study by experimentation how a 8086 microprocessor responds for various conditions. Using this trainer, students studying in electronics, electrical, instrumentation, mechanical, chemical engineering subjects, B.Sc. (electronics, computers, and physics) laboratory, and polytechnics can learn programming an 8086 Microprocessor. This can be used to some extent for designing prototypes.

Additional Information:

• Item Code: 43003
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 43002 
8085 Microprocessor Trainer 
Features :
8085 Microprocessor Trainer can interface with IBM PC/XT/AT computer with the help of 96 bit TTL I/O Experimental Interface and Editor Assembler Software. It is quite an efficient system based on Industry Standard Intel 8085 ip for the purpose of training and prototype development of microprocessor based systems. Its hardware is capable of supporting multi processor configuration also.

The unit is self contained and requires no other apparatus. Practical experience on this board carries great educative value for Science and
Engineering Students.

The Microprocessor trainer is designed to teach the subject of Microprocessor programming and interfacing through practical, essentially designed to teach the study of :

Additional Information:

• Item Code: 43002
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

8031 Micro Controller Trainer uses 8031/8051 versatile micro-controller. This controller finds estensive applications in automation. This is because of its architecture and built-in I/O capabilities. The use of this controller considerably reduces the chip count in the final product design. Hence this finds extensive applications in automatic vending machines, weighing machines, welding machines, microwave ovens etc. Therefore it becomes necessary to study the function and its capabilities, by experimentation. The Micro-controller trainer is an IBM PC/XT/AT & Pentium compatible instrument. This is a single PCB module. The instrument is connected to serial port of IBM computer at RS232C port. A 50 pin FRC connector provides unbuffered Address, Data and Control Lines. This may be used for system expansion at a later date.

• Terminal emulation software is supplied along with the trainer. This supports UP LOAD and DOWN LOAD function.
• In addition to this, it has features to modify and display internal as well as external memory locations.
• Dump memory contents in some other location as specified.
• Move a block of memory from a source address to destination address.
• Execute from a specified memory location.
• Display contents of all register and alter a few or all registers.
• Facility to stop execution once a break point location reaches.
• The unit is operative on 230V, 50 Hz A.C. Mains.
• Strongly Supported by Detailed operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.

Code - 43004

More Details In Attached PDF...

Additional Information:

• Item Code: 43004
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 43005 
8051 Micro-Controller Trainer  
Features :

8051 Micro Controller Trainer uses 8051 versatile micro-controller. This controller finds estensive applications in automation. This is because of its architecture and built-in I/O capabilities. The use of this controller considerably reduces the chip count in the final product design. Hence this finds extensive applications in automatic vending machines, weighing machines, welding machines, microwave ovens etc. Therefore it becomes necessary to study the function and its capabilities, by experimentation.

The Micro-controller trainer is an IBM PC/XT/AT & Pentium compatible instrument. This is a single PCB module. The instrument is connected to serial port of IBM computer at RS232C port. A 50 pin FRC connector provides unbuffered Address, Data and Control Lines. This may be used for system expansion at a later date.

• In addition to this, it has features to modify and display internal as well as external memory locations.
• Dump memory contents in some other location as specified.
• Move a block of memory from a source address to destination address.
• Execute from a specified memory location.
• Display contents of all register and alter a few or all registers.
• Facility to stop execution once a break point location reaches.
• The unit is operative on 230V, 50 Hz A.C. Mains.
• Strongly Supported by Detailed operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.

Additional Information:

• Item Code: 43005
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

Order Code -43032 Computer Interfacing Trainer is an excellent learning tool for starters for learning computer interfacing. 43032 or Optional Modules CIM-011 to 017 could be ideal training systems for learning "How hardware could be connected/ operated from PC". This training kit has been enriched by the ideas of students who have put their inputs in designing / developing the same. System housed in attractive enclosure is supplied with mains cord, 25-pin parallel cable and instruction manual.

Features:

• Introduction to C Programming
• Introduction to Interfacing through C Programming
• Parallel / Printer Port Understanding in PC
• Step by Step learning for "How hardware could be connected/ operated from PC"
• In built Power Supply +5V@1A and +12V@200mA

Code - 43032

More Details In Attached PDF...

Additional Information:

• Item Code: 43032
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

43201 is a single board MicroprocessorTrainer Kit based on 8085 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, 16x1 LCD Display and Keyboard for Man to Machine Interface.

• 8K Bytes of EPROM with 8K bytes of Battery Backup RAM.
• 24 I/O Lines, Three Channel Timer/Counter, PC Serial Interface.
• 16x1 LCD Display with 101 ASCII Keyboard.
• Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register.
• Uploading & Downloading to and from PC in Windows98/XP/NT.
• In-Built Power Supply.

Code - 43201

More Details In Attached PDF...

Additional Information:

• Item Code: 43201
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features

43202 is a single board Microprocessor Trainer Kit based on 8085 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.

Features

• 8K Bytes of EPROM with 8K bytes of Battery Backup RAM.
• 24 I/O Lines, Three Channel Timer/Counter, PC Serial Interface.
• Seven Segment Display with 28 Keys Hex Keypad.
• Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register.
• Uploading & Downloading to and from PC in Windows98/XP/NT.
• In-Built Power Supply.

Code - 43202

More Details In Attached PDF...

Additional Information:

• Item Code: 43202
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Order Code - 43203 is a single board Microprocessor Trainer Kit based on 8085 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.

Features

• 8K Bytes of EPROM with 8K bytes of Battery Backup RAM.
• 46 I/O Lines, Three Channel Timer/Counter, PC Serial Interface.
• Seven Segment Display with 28 Keys Hex Keypad.
• Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register.
• Uploading & Downloading to and from PC in Windows98/XP/NT.
• In-Built Power Supply.

Specifications

• Based on 8085 CPU operating at 6.144 Mhz.
• 8K bytes of Powerful Monitor Program using 27512 EPROM 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
• On-board one memory expansion up to 56KB.
• Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
• 24 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
• 22 I/O lines provided through 8155 brought out at 26 Pins FRC Connector .
• RS-232C interface through SID/SOD lines
• Two mode of commands

Code - 43203

More Details In Attached PDF...

Additional Information:

• Item Code: 43203
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features

43204 is a single board Microprocessor Trainer Kit based on 8085 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, 20x2 LCD Display and Keyboard for Man to Machine Interface.

¿¿

Code - 43204

More Details In Attached PDF...

Additional Information:

• Item Code: 43204
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features

43211 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.

¿¿

Code - 43211

More Details In Attached PDF...

Additional Information:

• Item Code: 43211
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features

43212 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, LCD Display and Keyboard for Man to Machine Interface.

¿¿

Code - 43212

More Details In Attached PDF...

Additional Information:

• Item Code: 43212
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Model Number - 43215 
8051 Microcontroller Trainer Kit 
43215 is a single board Microcontroller Trainer Kit based on 8 bit 8051 Microcontroller, which is widely used to train engineers to develop on software/hardware for any industrial process & control. Kit has power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, LCD Display, Keyboard for Man to Machine Interface. 
Features: 
16K Bytes of EPROM with 32K bytes of Battery Backup RAM.48 I/O Lines, Three Channel Timer/Counter, PC Serial Interface using USART, 12 bit ADC, DAC, RTC. 5 20x2 LCD Display with 101 ASCII Keyboard.Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Registor.Uploading & Downloading to and from PC inWindows98/XP/NT.In-Built Power Supply. 
Specifications: 
8051/89C52/89C51RD2/89C61X2 CPU operating @11.0592MHz.32K user RAM using 6264 with Battery Backup using NICD Battery .One socket is provided for RAM expansion up to 64K.16K bytes of powerful monitor EPROM using 27512.

Additional Information:

• Item Code: 43215
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4-5 Week
• Packaging Details: Corrugated Box

Product Details:

Features :

43219 is a single board Microprocessor Trainer Kit based on 8085 Microprocessor, which is widely used to train engineers to develop Microprocessor, which is widely used to train engineers to develop consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.

 

Code - 43219

More Details In Attached PDF...

Additional Information:

• Item Code: 43219
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

Order Code - 43511 is a single board Embedded Kit based on ARM, AVR, 89CXX, PIC Microcontrollers for any Embedded applications.

Code - 43511-43525

More Details In Attached PDF...

Additional Information:

• Item Code: 43511
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

01. Supported Piggy Bag Modules:

• 1.1 Order Code 43543 - Piggy Bag XILINX XC9572 CPLD (optional)
• 1.2. Order Code 43544 - Piggy Bag XILINX XC95108 CPLD (optional)
• 1.3. Order Code 43541 - Piggy Bag XILINX SPARTAN XC3S50 FPGA(optional)
• 1.4 Order Code 43542 - Piggy Bag XILINX SPARTAN XC3S400 FPGA(optional)
• 1.5 Piggy Bag ALTRA EPIC6PQ240CB FPGA(optional)

02. Indicators

• 2.1 16 input using 2 nos. Of 8 way DIP Switch with LED indication to indicate logic low and logic high
• 2.2 16 LED for output indication.

03. Onboard Interfaces

• 3.1 4 Digit Seven Segment Displays
• 3.2 8 bit A/D convertor using ADC-0809.
• 3.3 8 bit D/A convertor using DAC-0800.
• 3.4 Stepper Motor Interface.
• 3.5 Relay Interface.
• 3.6 Ps2 Interface.
• 3.7 RS-232 Interface.
• 3.8 VGA Interface.
• 3.9 16x1 Alphanumeric LCD Display.
• 3.10 5x4 Keys Keyboard Matrix.

Code - 43540-43550

More Details In Attached PDF...

Additional Information:

• Item Code: 43540
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week

Product Details:

Features :

Order Code - 43501 is a single board Universal Embedded Kit based on MCU (Philips 89C61X2) Microcontroller for any Embedded Applications.

Feature:

• CPU: Philips 89C61X2 Microcontroller
• ISP Programming facility

Onboard Application:

• 8 LEDs to display Digital Output
• 8 Switches to give Digital Input each indicated by LED
• 16*2 Alphanumeric LCD
• 4 digit Seven segment displays

 

Code - 43501-43504

More Details In Attached PDF...

Additional Information:

• Item Code: 43501
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100
• Delivery Time: 4 Week